Welcome to Club SAITO !
![](/forum/images/badges/premium_member.png)
![Default](https://www.rcuniverse.com/forum/images/icons/icon1.gif)
What's the problem?
The batch was 15 gallons
$32.50 for the methanol
$80 for the nitromethane (wish it was free)
$94 for the oil
Quite a bit under $13.76/gallon if that nitromethane was free!
The batch was 15 gallons
$32.50 for the methanol
$80 for the nitromethane (wish it was free)
$94 for the oil
Quite a bit under $13.76/gallon if that nitromethane was free!
![Default](https://www.rcuniverse.com/forum/images/icons/icon1.gif)
And the bearings would last to Christ's return!!!
Beautiful plane beautiful flight.
Congrats
Aaron-
![Default](https://www.rcuniverse.com/forum/images/icons/icon1.gif)
![Smile](https://www.rcuniverse.com/forum/images/smilies/smile.gif)
![Default](https://www.rcuniverse.com/forum/images/icons/icon1.gif)
Last edited by Glowgeek; 09-17-2021 at 09:44 AM.
![Default](https://www.rcuniverse.com/forum/images/icons/icon1.gif)
Restored by James Henry. His daddy is in the picture at the front wheel. Wearing his leathers in front of his 80" flattie. My mother in law ( just buried her ) and he rode to school. Anne in the pilot seat on lenawee county mud roads, and little brother on his 36 knuck.
Jim has that scooter too. Unrestored and rideable on its bias ply WW2 synthetics.
Fortitude and class. God Bless America.
Land that I love....
Here I am free to play wit me Saitos!
Cause of them.
![](/forum/images/badges/premium_member.png)
![Default](https://www.rcuniverse.com/forum/images/icons/icon1.gif)
Surely did, just the engine 1974 was the year. It was sitting out behind Lee's Surplus on GratiotvAve near 10 Mile Road. You have probably heard of the fellow they just released from prison, name of "White Boy Rick" The owner of Lee's was his daddy. It was sitting there minus the head etc but it did have the Heath gearbox snd prop hub in place. I paid $15 for it because Lee said that was about what the scrap value was and he was about to scrap it! I sold the engine, sans the Heath parts to a local Indian shop "Indian Wally". About 10 years later met a fellow from Chicago who was restoring a Heath Parasol and he was quite happy to take the Heath gearbox etc.
Restored a couple of the Indian version engines at our shop back then.
I caught that thing about one day away from the scrap yard.
You can web search "White Boy Rick" or "Rick Wershe" for more info on Lee's kid.
Be cool to see Saito make an inline four, glow engine!
Better still, a triple![Wink](https://www.rcuniverse.com/forum/images/smilies/wink.gif)
Restored a couple of the Indian version engines at our shop back then.
I caught that thing about one day away from the scrap yard.
You can web search "White Boy Rick" or "Rick Wershe" for more info on Lee's kid.
Be cool to see Saito make an inline four, glow engine!
Better still, a triple
![Wink](https://www.rcuniverse.com/forum/images/smilies/wink.gif)
Last edited by Jesse Open; 09-17-2021 at 03:22 PM.
![Default](https://www.rcuniverse.com/forum/images/icons/icon1.gif)
Surely did, just the engine 1974 was the year. It was sitting out behind Lee's Surplus on GratiotvAve near 10 Mile Road. You have probably heard of the fellow they just released from prison, name of "White Boy Rick" The owner of Lee's was his daddy. It was sitting there minus the head etc but it did have the Heath gearbox snd prop hub in place. I paid $15 for it because Lee said that was about what the scrap value was and he was about to scrap it! I sold the engine, sans the Heath parts to a local Indian shop "Indian Wally". About 10 years later met a fellow from Chicago who was restoring a Heath Parasol and he was quite happy to take the Heath gearbox etc.
Restored a couple of the Indian version engines at our shop back then.
I caught that thing about one day away from the scrap yard.
You can web search "White Boy Rick" or "Rick Wershe" for more info on Lee's kid.
Be cool to see Saito make an inline four, glow engine!
Better still, a triple![Wink](https://www.rcuniverse.com/forum/images/smilies/wink.gif)
Restored a couple of the Indian version engines at our shop back then.
I caught that thing about one day away from the scrap yard.
You can web search "White Boy Rick" or "Rick Wershe" for more info on Lee's kid.
Be cool to see Saito make an inline four, glow engine!
Better still, a triple
![Wink](https://www.rcuniverse.com/forum/images/smilies/wink.gif)
I spent many cold dark days chuckin wood into a barrel at the shop with Mary Jane. Dicking around with knucks, pans and shovels. LONG before I flipped a Saito.
My 65 rose up from parts there in the early eighties.
Was owned by a Vagabond when I pulled the engine out of the hacked up wishbone cradle. Bolted it into the bone stock un cut e glide frame Dave had printed my name on.
Usually held the scattergun at the back door as Dave locked up and we split.
I was a "biker" back then. HEHE.
Saitos are so much safer....
![Default](https://www.rcuniverse.com/forum/images/icons/icon1.gif)
LolIndian Wally hung out with Cowboy ( RIP ) at my buddy Mary Janes Chopper Heaven (RIP) Dave Mutchall on schoolcraft and evergreen in Da Hood.
I spent many cold dark days chuckin wood into a barrel at the shop with Mary Jane. Dicking around with knucks, pans and shovels. LONG before I flipped a Saito.
My 65 rose up from parts there in the early eighties.
Was owned by a Vagabond when I pulled the engine out of the hacked up wishbone cradle. Bolted it into the bone stock un cut e glide frame Dave had printed my name on.
Usually held the scattergun at the back door as Dave locked up and we split.
I was a "biker" back then. HEHE.
Saitos are so much safer....
I spent many cold dark days chuckin wood into a barrel at the shop with Mary Jane. Dicking around with knucks, pans and shovels. LONG before I flipped a Saito.
My 65 rose up from parts there in the early eighties.
Was owned by a Vagabond when I pulled the engine out of the hacked up wishbone cradle. Bolted it into the bone stock un cut e glide frame Dave had printed my name on.
Usually held the scattergun at the back door as Dave locked up and we split.
I was a "biker" back then. HEHE.
Saitos are so much safer....
![](/forum/images/badges/trading_plus_member.png)
My Feedback: (51)
![Default](https://www.rcuniverse.com/forum/images/icons/icon1.gif)
Hello all,
I have an opportunity to pick up a Saito 450 radial that has the gas conversion from CH Ignition from a club member, he has not run the engine since the conversion. Does anyone have experience with this engine? Would like to know reliability and performance. Wondering if it'll perform as well as the G62 I have in my H9 Corsair. Anyone know what the expected RPM's would be on a Xoar 22X10 after the gas conversion? Do the engine hold up to the gas conversion? Any information is appreciated.
Thank you,
Todd D
I have an opportunity to pick up a Saito 450 radial that has the gas conversion from CH Ignition from a club member, he has not run the engine since the conversion. Does anyone have experience with this engine? Would like to know reliability and performance. Wondering if it'll perform as well as the G62 I have in my H9 Corsair. Anyone know what the expected RPM's would be on a Xoar 22X10 after the gas conversion? Do the engine hold up to the gas conversion? Any information is appreciated.
Thank you,
Todd D
![](/forum/images/badges/premium_member.png)
My Feedback: (1)
![Default](https://www.rcuniverse.com/forum/images/icons/icon1.gif)
sO Tower's sent me another balancer,
so lets talk about balancing APC props. has any one had problems balancing APC props? I remember some one here. LOL saying without saying reasons that he does not like APC props. well what people like or dislike I have no problem with, to each his own likes and dislikes. but I tell you it took me an hour and a half to balance this brand new APC 11x8. what ever I did the balance would go this way or that way. adding CA to one side of the hub 3 times helped, but at that point what ever I did it went this way or that way. UNTIL I sanded a bit off the inner part of the blade near the hub. just sanding there on that one side it balanced with sanding there twice.
so has anyone had this, finding that you need to sand on the thicker spot that is between the blade fin and the hub ??
I used to use a boat prop balancer. it worked well. but this True Spin balancer seems to be very smooth/work very well.
Jim
so lets talk about balancing APC props. has any one had problems balancing APC props? I remember some one here. LOL saying without saying reasons that he does not like APC props. well what people like or dislike I have no problem with, to each his own likes and dislikes. but I tell you it took me an hour and a half to balance this brand new APC 11x8. what ever I did the balance would go this way or that way. adding CA to one side of the hub 3 times helped, but at that point what ever I did it went this way or that way. UNTIL I sanded a bit off the inner part of the blade near the hub. just sanding there on that one side it balanced with sanding there twice.
so has anyone had this, finding that you need to sand on the thicker spot that is between the blade fin and the hub ??
I used to use a boat prop balancer. it worked well. but this True Spin balancer seems to be very smooth/work very well.
Jim
Last edited by the Wasp; 09-18-2021 at 05:37 PM.
![Default](https://www.rcuniverse.com/forum/images/icons/icon1.gif)
I buy my APC props from apcprop.com and have had no problem blade balancing them in less than 5 minutes by sanding the front side of the heavy blade. Hub balancing, if I elect to do it, takes another 10 minutes or so. I use velcro (the fuzzy side) and CA for that job.
A good portion of the balancing complaints I hear are about APC clones from fleabay and other vendors. The rest of the problems people encounter balancing authentic APC props I believe are self inflicted ie not reaming the prop hole dead center from front to back. I always check the balance before and after reaming to ensure I'm not creating problems. Authentic APC props are perfect or very close to perfectly balanced from the factory in my experience.
As far as removing material on or near the hub, I wouldn't recommend it. Better to add weight to the light side of the hub.
A good portion of the balancing complaints I hear are about APC clones from fleabay and other vendors. The rest of the problems people encounter balancing authentic APC props I believe are self inflicted ie not reaming the prop hole dead center from front to back. I always check the balance before and after reaming to ensure I'm not creating problems. Authentic APC props are perfect or very close to perfectly balanced from the factory in my experience.
As far as removing material on or near the hub, I wouldn't recommend it. Better to add weight to the light side of the hub.
![](/forum/images/badges/premium_member.png)
My Feedback: (6)
![Default](https://www.rcuniverse.com/forum/images/icons/icon1.gif)
I went up to Wichita today to pick up new hearing aids and watch my grandson run cross country. Before leaving town I got the pleasure of visiting a real hobby shop and managed to drop the last $50 of my hobby stash. He had 15% Nitro fuel for $23.00 a gallon I wished I had had another $25 in the kitty! It was great being in a reall LHS after 2 years!
![Default](https://www.rcuniverse.com/forum/images/icons/icon1.gif)
As for engine longivity, with proper oiling gas engines are no more prone to wear or failure than ringed glow engines, all other things being equal. I run all my bushed connecting rod gassers on 15:1 Stihl Ultra oil. No problems with wear so far.
Hope this helps
Last edited by Glowgeek; 09-19-2021 at 09:42 AM.
![](/forum/images/badges/premium_member.png)
![Default](https://www.rcuniverse.com/forum/images/icons/icon1.gif)
I went up to Wichita today to pick up new hearing aids and watch my grandson run cross country. Before leaving town I got the pleasure of visiting a real hobby shop and managed to drop the last $50 of my hobby stash. He had 15% Nitro fuel for $23.00 a gallon I wished I had had another $25 in the kitty! It was great being in a reall LHS after 2 years!
![Wink](https://www.rcuniverse.com/forum/images/smilies/wink.gif)
![Default](https://www.rcuniverse.com/forum/images/icons/icon1.gif)
![Smile](https://www.rcuniverse.com/forum/images/smilies/smile.gif)
Last edited by Glowgeek; 09-19-2021 at 09:03 AM.