Go Back  RCU Forums > RC Airplanes > Giant Scale Aircraft - General
Reload this Page >

It's here and Looks GOOD new Hangar 9 Taylorcraft

Notices
Giant Scale Aircraft - General Discuss all other giant scale aircraft here.

It's here and Looks GOOD new Hangar 9 Taylorcraft

Old 08-24-2009, 05:53 PM
  #1  
dale691
Thread Starter
 
dale691's Avatar
 
Join Date: Dec 2003
Location: Cairns, AUSTRALIA
Posts: 591
Received 0 Likes on 0 Posts
Default It's here and Looks GOOD new Hangar 9 Taylorcraft

Hi all, just received my Taylorcraft and it is very impressive. All I have done so far is to have a look through and do a dry assembly. The quality is what you expect from hangar 9, everything fits up very well particularly the tail plane. From the look of it this machine is going to be a very quick build.

I was thinking of installing the SPE 26 in this plane not sure yet? I also have a Saito FG 20 sitting there but not sure if it will have the required power.

Here are a couple of pics to start the ball rolling.
Attached Thumbnails Click image for larger version

Name:	Ur52368.jpg
Views:	360
Size:	98.6 KB
ID:	1262585   Click image for larger version

Name:	Dz81150.jpg
Views:	245
Size:	105.6 KB
ID:	1262586   Click image for larger version

Name:	Kp34788.jpg
Views:	301
Size:	99.5 KB
ID:	1262587  
Old 08-25-2009, 01:42 AM
  #2  
aerocom20
Member
 
Join Date: Jul 2004
Location: sa, AUSTRALIA
Posts: 42
Likes: 0
Received 0 Likes on 0 Posts
Default RE: It's here and Looks GOOD new Hangar 9 Taylorcraft

Gday Dale
It does look good was that a full body pilot I could see in the pic? Look forward to hearing how the build goes and what powerplant you decide to use..Keep the pics coming
Old 08-25-2009, 06:06 AM
  #3  
PLANE JIM
My Feedback: (109)
 
Join Date: Dec 2002
Location: AT THE AIRPORT
Posts: 2,005
Likes: 0
Received 1 Like on 1 Post
Default RE: It's here and Looks GOOD new Hangar 9 Taylorcraft

Please let us know how it assembles.
Old 08-25-2009, 06:25 AM
  #4  
Zippi
My Feedback: (10)
 
Zippi's Avatar
 
Join Date: Jun 2004
Location: Evansville, IN
Posts: 4,977
Likes: 0
Received 1 Like on 1 Post
Default RE: It's here and Looks GOOD new Hangar 9 Taylorcraft

dale691,

I have this plane on backorder and they will probably ship late this week. I'm thinking of a gasser in the 28cc to 38cc range. At 14–15.5 lb I want it to have enough power to hover the plane a little. The plane looks really good. Keep us informed on the built and engine selection.
Old 08-25-2009, 03:11 PM
  #5  
mrbigg
My Feedback: (21)
 
mrbigg's Avatar
 
Join Date: Oct 2004
Location: Streator, IL
Posts: 4,780
Likes: 0
Received 1 Like on 1 Post
Default RE: It's here and Looks GOOD new Hangar 9 Taylorcraft

An OS 1.60 FX will hover the plane. A guy I know used to hover the old one with that powerplant. I just picked the old one up used and the guy said that it's airborne almost instantly with a G26. I have a G38 needing a home, so I think I'll go with that.
Old 08-26-2009, 06:15 AM
  #6  
Zippi
My Feedback: (10)
 
Zippi's Avatar
 
Join Date: Jun 2004
Location: Evansville, IN
Posts: 4,977
Likes: 0
Received 1 Like on 1 Post
Default RE: It's here and Looks GOOD new Hangar 9 Taylorcraft

ORIGINAL: mrbigg

An OS 1.60 FX will hover the plane. A guy I know used to hover the old one with that powerplant. I just picked the old one up used and the guy said that it's airborne almost instantly with a G26. I have a G38 needing a home, so I think I'll go with that.
Yeah, the OS 160 would probably be a good match for glow. I much prefer a gasser as you because it's much easier on the wallet for fuel, less equipment to take to the field, has a very cool sound, and virtually no cleanup.

dale691,

Is the wing semi or full symmetrical?
Old 08-26-2009, 08:44 AM
  #7  
mrbigg
My Feedback: (21)
 
mrbigg's Avatar
 
Join Date: Oct 2004
Location: Streator, IL
Posts: 4,780
Likes: 0
Received 1 Like on 1 Post
Default RE: It's here and Looks GOOD new Hangar 9 Taylorcraft

I know your a gas man, Zippi. I was just giving you a power reference of what's needed to hover.
Old 08-26-2009, 10:52 AM
  #8  
jmohn
Senior Member
 
Join Date: Jul 2007
Location: San Jose, CA
Posts: 2,060
Likes: 0
Received 0 Likes on 0 Posts
Default RE: It's here and Looks GOOD new Hangar 9 Taylorcraft

Can I get my Saito 36 gaser in the cowl? Looks great can't wait for mine.


Jeff
Old 08-26-2009, 11:11 AM
  #9  
mrbigg
My Feedback: (21)
 
mrbigg's Avatar
 
Join Date: Oct 2004
Location: Streator, IL
Posts: 4,780
Likes: 0
Received 1 Like on 1 Post
Default RE: It's here and Looks GOOD new Hangar 9 Taylorcraft

Not if you side mount it. The old style I picked up had a 1.80 mounted also on it's side and there is a big old nasty hole cut out for it.[:@]
Old 08-26-2009, 04:28 PM
  #10  
dale691
Thread Starter
 
dale691's Avatar
 
Join Date: Dec 2003
Location: Cairns, AUSTRALIA
Posts: 591
Received 0 Likes on 0 Posts
Default RE: It's here and Looks GOOD new Hangar 9 Taylorcraft

The wing is a full symmetrical wing. I am thinking of giving the XYZ 26 engine from Hobbycity a go in this plane. I know they are a bit on the cheap side and maybe not a power house but I'm just curious. Does anyone know dimensions wise if they are about the same as the Zenoah?

Also If you bend the undercarriage on this plane I think you will also destroy the fuselage, it is very very heavy duty. good stuff
Old 08-26-2009, 04:35 PM
  #11  
jmohn
Senior Member
 
Join Date: Jul 2007
Location: San Jose, CA
Posts: 2,060
Likes: 0
Received 0 Likes on 0 Posts
Default RE: It's here and Looks GOOD new Hangar 9 Taylorcraft

I was planning on mounting the Saito 36 inverted. I have a Pitts style muffler for it already. If not I am going electric and save the Saito for my LA-7


Jeff
Old 08-26-2009, 05:09 PM
  #12  
dale691
Thread Starter
 
dale691's Avatar
 
Join Date: Dec 2003
Location: Cairns, AUSTRALIA
Posts: 591
Received 0 Likes on 0 Posts
Default RE: It's here and Looks GOOD new Hangar 9 Taylorcraft

I didn't know before I opened the box all surfaces are glues and horns are installed. Seems to me Hangar 9 are really making moves to have QB type aircraft. even down to the markings on the fire wall for selected engines.
Old 08-28-2009, 09:17 AM
  #13  
gade600sdi
Senior Member
 
Join Date: Mar 2009
Location: Harrisburg, PA
Posts: 298
Likes: 0
Received 1 Like on 1 Post
Default RE: It's here and Looks GOOD new Hangar 9 Taylorcraft

I hope your are talking about the Zenoah G26 I just got one G26 EI and put it on the shelf waiting for my Tcraft. I hope mine comes in next week. Just to clarify you mean the Zenoah........... Mr. Bigg?. They say 20-26cc gas so I hope the Zenoah 26 will be good for this one.

The instruction manual online only talks about a 20 cc Zenoah. I bought the bigger one because I thought it would fit and the 20 cc may be a little on the low end for power. Anyway I hope I bought the right motor.
Old 08-28-2009, 09:20 AM
  #14  
gade600sdi
Senior Member
 
Join Date: Mar 2009
Location: Harrisburg, PA
Posts: 298
Likes: 0
Received 1 Like on 1 Post
Default RE: It's here and Looks GOOD new Hangar 9 Taylorcraft

Dale 691 are there markings for a Zenoah 26 or just a Zenoah 20?
Old 08-28-2009, 11:55 AM
  #15  
Zippi
My Feedback: (10)
 
Zippi's Avatar
 
Join Date: Jun 2004
Location: Evansville, IN
Posts: 4,977
Likes: 0
Received 1 Like on 1 Post
Default RE: It's here and Looks GOOD new Hangar 9 Taylorcraft

Here is some exciting news form another thread just yesterday.

The Taylorcraft models will begin to ship tomorrow.

Thanks for your patience


_____________________________

Bill Brundle
Senior Product Developer Hangar 9, Saito, & Evolution
Old 08-28-2009, 06:01 PM
  #16  
Zippi
My Feedback: (10)
 
Zippi's Avatar
 
Join Date: Jun 2004
Location: Evansville, IN
Posts: 4,977
Likes: 0
Received 1 Like on 1 Post
Default RE: It's here and Looks GOOD new Hangar 9 Taylorcraft

I received my invoice today so it's headed my way.
Old 08-28-2009, 08:18 PM
  #17  
hanko
 
Join Date: Jul 2006
Location: , MI
Posts: 872
Likes: 0
Received 0 Likes on 0 Posts
Default RE: It's here and Looks GOOD new Hangar 9 Taylorcraft

Not a symmetrical airfoil, by a long shot. NCAA 2300 series
Old 08-29-2009, 12:58 AM
  #18  
frank99
My Feedback: (29)
 
Join Date: Jun 2002
Location: Sheridan, AR
Posts: 810
Received 0 Likes on 0 Posts
Default RE: It's here and Looks GOOD new Hangar 9 Taylorcraft

mrbigg i have the old version and it is a hanger queen ,1.8 saito mounted upside down , scared to fly it ,i am flying h9 yak can i fly the taylor craft oh will the engine run ok, thanks frank
Old 08-29-2009, 10:43 AM
  #19  
mrbigg
My Feedback: (21)
 
mrbigg's Avatar
 
Join Date: Oct 2004
Location: Streator, IL
Posts: 4,780
Likes: 0
Received 1 Like on 1 Post
Default RE: It's here and Looks GOOD new Hangar 9 Taylorcraft


ORIGINAL: gade600sdi

I hope your are talking about the Zenoah G26 I just got one G26 EI and put it on the shelf waiting for my Tcraft. I hope mine comes in next week. Just to clarify you mean the Zenoah........... Mr. Bigg?. They say 20-26cc gas so I hope the Zenoah 26 will be good for this one.

The instruction manual online only talks about a 20 cc Zenoah. I bought the bigger one because I thought it would fit and the 20 cc may be a little on the low end for power. Anyway I hope I bought the right motor.
I was refering to the Zenoah G26.
Old 08-29-2009, 06:04 PM
  #20  
dale691
Thread Starter
 
dale691's Avatar
 
Join Date: Dec 2003
Location: Cairns, AUSTRALIA
Posts: 591
Received 0 Likes on 0 Posts
Default RE: It's here and Looks GOOD new Hangar 9 Taylorcraft

Here are some more photos guys!
Attached Thumbnails Click image for larger version

Name:	Li20929.jpg
Views:	216
Size:	78.1 KB
ID:	1265425   Click image for larger version

Name:	Mi21931.jpg
Views:	198
Size:	67.3 KB
ID:	1265426   Click image for larger version

Name:	Uz68507.jpg
Views:	213
Size:	72.4 KB
ID:	1265427  
Old 08-29-2009, 06:05 PM
  #21  
dale691
Thread Starter
 
dale691's Avatar
 
Join Date: Dec 2003
Location: Cairns, AUSTRALIA
Posts: 591
Received 0 Likes on 0 Posts
Default RE: It's here and Looks GOOD new Hangar 9 Taylorcraft

And some more. I haven't had much to do with the Zenoah, are the mountings different on the 20 and the 26. The only marks on the fire wall say 20ei.
Attached Thumbnails Click image for larger version

Name:	Pn37260.jpg
Views:	236
Size:	78.5 KB
ID:	1265430   Click image for larger version

Name:	Je98902.jpg
Views:	198
Size:	73.7 KB
ID:	1265431   Click image for larger version

Name:	In27434.jpg
Views:	212
Size:	77.3 KB
ID:	1265432   Click image for larger version

Name:	Bv59577.jpg
Views:	270
Size:	71.6 KB
ID:	1265433  
Old 08-29-2009, 06:45 PM
  #22  
Zippi
My Feedback: (10)
 
Zippi's Avatar
 
Join Date: Jun 2004
Location: Evansville, IN
Posts: 4,977
Likes: 0
Received 1 Like on 1 Post
Default RE: It's here and Looks GOOD new Hangar 9 Taylorcraft

ORIGINAL: dale691

And some more. I haven't had much to do with the Zenoah, are the mountings different on the 20 and the 26. The only marks on the fire wall say 20ei.
dale691,

The pics look good. Can't wait to get mine. What you can do is remove the flat mount plate from the back of the engine and mark a center line from left to right. Draw a horizonal line thru the marks for the G20 on the firewall. Lay the mount plate on the firewall and line up your center line on the mount plate with the center line on the firewall and the horizonal line you marked on the firewall. The horizonal line should be lined up in the center of the mounting holes. Now, use your mount plate as a template and mark the hole locations and drill.
Old 08-29-2009, 06:50 PM
  #23  
Zippi
My Feedback: (10)
 
Zippi's Avatar
 
Join Date: Jun 2004
Location: Evansville, IN
Posts: 4,977
Likes: 0
Received 1 Like on 1 Post
Default RE: It's here and Looks GOOD new Hangar 9 Taylorcraft

dale691,

Can you give me a dimension from the center of the cowl to one side. I'm trying to figure out ow much of the cowl I may need to cut for the gasser I'm going to use.
Old 08-29-2009, 07:22 PM
  #24  
Rudolph Hart
 
Rudolph Hart's Avatar
 
Join Date: Apr 2008
Location: Perth, AUSTRALIA
Posts: 4,383
Likes: 0
Received 2 Likes on 2 Posts
Default RE: It's here and Looks GOOD new Hangar 9 Taylorcraft

Nice looking.Can you include the measurement from the firewall to the cowl front?
Old 08-31-2009, 07:49 AM
  #25  
gade600sdi
Senior Member
 
Join Date: Mar 2009
Location: Harrisburg, PA
Posts: 298
Likes: 0
Received 1 Like on 1 Post
Default RE: It's here and Looks GOOD new Hangar 9 Taylorcraft

I expect a lot of us will have these in our hands by the end of the week. I hope the G26 will fit in the cowl.

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.