KMP Tiger cat wing failure
03-17-2019, 03:05 PM
#1
Thread Starter
My Feedback: (7)
Join Date: Jan 2004
Location: Coleman,
TX
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
KMP Tiger cat wing failure
just purchased plane and picked up wing and set on fuselage, reached to get bolts and wing dropped on both sides. Does anyone have a suggestion for repair, maybe epoxy,??????
03-26-2019, 03:02 PM
#6
03-26-2019, 03:37 PM
#7
Well, I had to do a little research on this plane. If I am looking at the right model, it is a twin engine warbird. The wing has a center section with 2 outer removable wing panels. So if this is the airplane, your problem may be how those wing panels attach. So definitely more info is needed and preferably some pictures.
03-27-2019, 07:55 AM
#9
fixable going to need to remove the bottom sheeting at least showing 3 rids one towards the front where the cheat spar is an same at the back..make up a doubler out of 1/4 ply an laminate it to the broken one in the front cut notches so it slides down an glue away.. with normal building skills you shouldn't have a problem fixing...looks like Kmp quality..
